Our Boards

Glosswood Prefinished Lining Boards are designed as a quick and easy solution for walls and ceilings both inside and outside (undercover) your home or commercial space. Our range includes a 90mm (9mm thick) and 130mm (10mm thick) standard lining board; a 91mm wide (26mm thick) Designer Lining range of deep-cut Single, Double and Slimline lining boards; a range of trims – Quad (19x19mm), Coverstrip (35x10mm) and Square-Edge (26x26mm); and a range of Posts (100x100mm, 120x120mm and 140x140mm). Our lining boards are supplied in 3.6m lengths, completely finished off and ready for installation with a V-joint tongue-and-groove profile and wide range of Satin UV coatings and Matte stains. That means no sanding, painting, varnishing or tricky carpentry work is needed when you install our boards. We coat or stain our boards on all four sides to help stabilise and protect against moisture. The trims can be matched to the colour of your boards and supplied in 3.6m lengths ready for installation to finish off your project. Our Designer Lining Range (supplied in 3.6m lengths) and Posts (supplied in 5.4m lengths) are available in our Matte Range colours only.
Satin UV Our Satin UV Range of colours has been developed and continually evolved since 1998. This finish is a superior ultra-violet light cured coating that is tougher than paint and gives a satin sheen level to your surface. It was one of the first no-VOC products on the market.
Matte Range We developed this range in 2013 to provide a natural option for our clients. We use a timber penetrating oil stain to produce a wide range of natural timber and design colours.
Versatility Our timber lining boards offer myriad architectural and decorator possibilities. They can be installed in vertical, horizontal or diagonal patterns and in many different ways: ceiling to bulkhead, up wall and over ceiling, behind your bed as a bedhead, to define a seating nook, as a colourful textural addition to a colour scheme, running from inside to out on the ceiling – the ideas and design possibilities are endless. Our Posts are perfect for creating room dividers or privacy screening.
Maintenance Our Satin UV Range of lining boards can be wiped down with a damp cloth; the Matte Range is best maintained with a soft-bristle brush to remove dust. The amount of upkeep required depends location and application.
See our complete colour range below. Visit Downloads for install information.

Matte

Cedar

Charcoal

Jarrah

Jetty

Merbau

Possum

Raw Paulownia

Spotted Gum

Teak

Satin UV

Cedar

Clear Ash

Distressed White

Driftwood

Feather Grey

Jarrah

Limewash

Tasmanian Oak

White